How To Change Bulb In Rescessed Can Light

Disclosure: Nosotros may get commissions for purchases made through links in this post.

Recessed lighting is gorgeous. Information technology has been around for a while, and it's likely here to stay. Occasionally, yous'll demand to change the seedling of a recessed calorie-free. The process is a little different than that for standard lights. We've researched the topic for yous and institute some helpful steps and tips.

How to change recessed lighting:

1. Gather your equipment: a ladder and duct tape.
2. Plough off the lite.
3. Tear off some duct tape and fold it in a loop.
4. Stick the duct record to the forepart of your shirt and climb the ladder with the new seedling.
5. Printing the duct record onto the low-cal bulb. Twist it counterclockwise until it is unscrewed.
6. Attach the duct tape to the new light bulb. Twist it clockwise until it is securely attached.

Fortunately, this process is piece of cake once you understand it. Keep reading to get more in-depth information about the steps.

How To Change Recessed Lighting Bulbs

1. Assemble your equipment: a ladder and duct tape

First, you'll desire to get your equipment. You demand a ladder to safely reach the recessed low-cal bulb. Generally, standard A-frame ladders volition do the job.

But pay attention to the ceiling acme. For case, use a 6-foot ladder if your ceiling is 8 to 10 anxiety high.

Here is a great half-dozen-pes ladder you can utilize. Click here to meet it on Amazon.

And you'll need duct tape to remove it. Yeah, duct tape! Surprisingly, duct record is an easy-to-utilise, common household particular that can be used to remove and insert recessed light bulbs. In fact, you probably have duct record in your miscellaneous drawer.

two. Plough off the light

Of course, you need to turn off the light switch prior to unscrewing the light seedling. Y'all would not want to accidentally fire yourself!

As long as you turn off the light switch, then the light bulb is not using the power. Thus, it won't get warm or hot. There's no demand to completely turn off the ability.

Turn on another light source so yous tin piece of work. This manner yous can have enough light to see what you're doing. For instance, you lot tin can use a floodlight.

If y'all're in the marketplace for a floodlight for your workshop, then look no further than Amazon. Here is a bully floodlight that can be used for all your DIY needs. Click here to run into it on Amazon.

Alternatively, you tin simply employ a regular lamp. This makes sense if you lot don't do a lot of at-abode projects.

3. Tear off some duct tape and fold it in a loop

Depending on the size of your easily, you will need to tear off about 8 to 10 inches of duct tape. For small to medium-sized hands, yous will need about half-dozen to 8 inches of duct tape. However, large hands will probably need about x to 12 inches of duct record. And it doesn't have to exist perfect; a rough judge is fine.

After you lot tear information technology, fold the duct tape with the viscid part facing outwards and the ends overlapping by about i inch. Now you lot should have a hollow loop.

If you don't have whatever duct record at home, then endeavour this heavy-duty silver duct tape. Click hither to see information technology on Amazon.

4. Stick the duct tape to the forepart of your shirt and climb the ladder with the new bulb

First, place 4 fingers within the hollow loop. This will help prevent the loop from collapsing. Next, place the duct record on the front of your shirt where you are non probable to accidentally squash the loop. Plus, it's for safe!

If the duct tape is on your shirt, then y'all are not trying to hold the tape while climbing the ladder. Likewise, you are not fumbling with the roll of record at the top of the ladder. This could lead to a nasty fall!

Again, safety is the priority! Carefully climb the ladder with the new, unwrapped bulb. Set it aside once you get to the superlative.

By the way, this might exist a peachy time to purchase an accessory for your ladder. This bag attaches to your ladder and holds small to medium-sized items and tools. For instance, you lot can set the new bulb inside information technology while you piece of work. Click hither to see information technology on Amazon.

5. Press the duct tape onto the light bulb. Twist it counterclockwise until information technology is unscrewed.

So, this might need a little more breakdown -

1. Gently peel off the duct tape from your shirt.
2. Place your fingers through the loop that you created.
3. Make your mitt into a fist.
4. Now you can gently press upward into the light bulb so the tape grabs the surface of the lite bulb.
5. Using the loop, plow the bulb counterclockwise until it is unscrewed.
6. Once more, you tin use the loop/tape to remove the bulb.

Notice how there is no need to remove the trim. The purpose of removing the trim when changing the seedling is to allow plenty room for your manus to grip and twist the light seedling. So you can eliminate this step if y'all use duct tape!

6. Attach the duct record to the new low-cal seedling. Twist it clockwise until it is deeply fastened.

Overall, this process is similar to how you adhere it to the one-time seedling. Here's a little more than detail -

1. Skin off the duct record from the erstwhile bulb. Once again, do this gently so you don't mess upwards the hollow loop.
2. Attach the duct tape to the new seedling.
3. Place your fingers in the loop.
4. Twist the bulb counterclockwise until information technology will no longer move.

How-To Tutorial

Okay, those were a lot of steps. If you want a visual, watch this helpful tutorial:

Can I utilise LED bulbs in recessed lighting?

Aye, y'all can apply LED bulbs in recessed lighting. In fact, LED bulbs can be used in most light fixtures. In general, the primary factors you should consider are -

• Wattage/Watts/W
• Voltage/Volts/5
• Size

Usually, you lot can notice the maximum wattage and voltage on the socket of the lite fixture. For example, if the light socket says Max 120V and Max 60 watts, then it can only handle up to 120 volts and lx watts. This means that lite bulbs that require higher voltage or wattage will non work or will burn out chop-chop.

Besides, most of the information volition be included at the stop of the light seedling, equally shown above. In detail, these LED bulbs can handle 200-240V and 6W.

Typically, you should measure out the diameter of the light fixture in millimeters or inches. Of grade, the LED seedling should not exceed the bore of the recessed calorie-free fixture.

How long do recessed LED light bulbs last?

Since LED low-cal bulbs employ less voltage and wattage than near standard lite bulbs, they tend to last longer. But certain factors touch how long they final, such equally -

• Length of fourth dimension
• Temperature

For the length of time, LED lights practice not last as long if they are on at all times. For instance, the lights at grocery stores usually remain on. Besides, LED lights do non last as long if they get too warm or too hot. For instance, indoor holiday lights are generally clustered together and on at all times. Thus, they get hot, and they will burn out faster.

Typically, LED bulbs volition last 50,000 hours. For residential use, this roughly translates to 17 years. Nevertheless, the product details will usually specify its lifespan.

Here is a pack of dimmable LED calorie-free bulbs that volition last up to x,000 hours. Click hither to see them on Amazon.

What kind of bulbs get in recessed lights?

Multiple types of bulbs tin be used for recessed lights. Aside from LED bulbs, you tin utilise incandescent, halogen, and fluorescent bulbs.

Overall, fluorescent and LED light bulbs are the best choices. They are both brilliant and energy-efficient. In fact, the LED lite bulbs that you use in your habitation typically use 75% less energy than incandescent light bulbs.

Still, fluorescent bulbs have more color options than LED bulbs. All the same, LED bulbs are non-toxic. Thus, they can exist tending of hands.

How practice you modify a recessed light bulb with a cover?

Sometimes in that location is a cover in the fashion of removing the recessed light bulb. First, endeavor to move the cover by applying pressure to it and shifting information technology counterclockwise. If it does non move, then you accept to remove the trim. Follow these steps -

1. Use both hands to grip the trim and pull.
2. Pull information technology towards y'all until the trim and canister popular out.
3. Unplug the two wires and squeeze together the two springs to release the canister.

Voila! You lot can now access the light bulb. Bank check out this video to learn more:

Summary

Overall, you tin easily change your recessed lighting bulbs by yourself. All you really need are a ladder, some duct tape, and your hands.

Nosotros hope these steps were helpful. Good luck!

Since you already have recessed lights, get ahead and check out some other articles -

• How To Reduce Glare From Recessed Lighting
• How Far Apart Should Recessed Lighting Be?
• Can You Put Recessed Lighting In A Garage?

Source: https://homedecorbliss.com/how-to-change-recessed-lighting-bulbs/

Posted by: spragueyoudiven.blogspot.com

Share this post